PES Pleated Cartridge Filter---PES Pleated Cartridge Filter
PES Pleated Cartridge Filter---PES Pleated Cartridge Filter
S&SD Series PES membrane cartridge filter with highly asymmetric PES membrane and PP hardware. Using thermal bonding process, contain no adhesive and surfactant. All filter with 100% Integrity test, it provide greater bacteria and particle removal at high flow rate and low pressure drop.
Feature:
- Excellent porosity and high efficiency
- Natural hydrophilic feature
- highly asymmetric PES membrane
- 100% Integrity test
- Low protein bonding
|
Material Construction |
|
|
Filter Media |
PES |
|
Supporter |
PP No Woven Fiber |
|
Core |
PP/SS 304/SS 316 |
|
Specification |
|
|
Length |
5’’~40’’ |
|
Micron Rate |
0.1μm~1.2μm |
|
Diameter -OD |
65mm, 69mm, 83mm, 114mm |
|
Operation Condition |
|
|
Max. Pressure Drop |
0.35Mpa@25℃ |
|
|
0.20Mpa@75℃ |
|
Max. Working Temp. |
80℃ |
|
Charge Out Pressure Drop |
0.25Mpa |
|
Sterilization |
200times Autoclave @121℃ 30mins |
|
Bacteria Challenge |
|
|
B.diminuta |
LRV>7 |
|
L. Lindneri |
LRV>7 |
|
L. Lindneri |
LRV>6 |
All components meet the EU and USA requirements for Food Contact Use in accordance with CFR (Code of Federal Regulations) Title 21 and EC/1935/2004 and subsequent amendments.
Application
|
|
|
|
|
|
Water Treatment |
Food and Beverage |
Pharmaceutical |
Fine Chemical |
Order Information
|
S |
10 |
F |
2F |
P |
S |
|
S-PES SD-Double Layers PES ‘’ |
05=5’’ 10-10‘’ 20-20‘’ 30-30‘’ 40-40‘’ |
A-0.1μm B-0.2μm B2-0.22μm C-0.45μm C5-0.5μm D-0.65μm E-0.8μm F-1.0μm F2-1.2μm |
O-DOE 2F-222/Fin 2FI-222/Fin with SS insert 2T-222/Flat 2TI-222/Flat with SS insert 6F-226/Fin 6FI-226/Fin with SS insert 6T-226/Flat 6TI-226/Flat with SS insert |
P-PP core 4S-304 SS 6S-316LSS |
S-Silicone E-EPDM N-NBR V-Viton F-PTFE EV-Encapsuled Viton ES-Encapsuled Silicon |
